Shaanxi Kairuihongxing Electronic Co., Ltd.
We Striving to find solution to custom-specific problem for every customers.
Add to Cart
Wholesale Wooden Ionic Ion & Ozone Generator Home Use Air Purifier Deodorizer Sterilizer
This classic air purifier is made of a hand stained and constructed cherry wood box. Heavy-duty stainless steel back cover and internal parts to ensure long term use of the air purifier. This deodorizer sterilizer uses ozone (O3) to clean the air and can reach up to 2000 sq feet. It is design for home permanent use, where you can nicely put along with your other furnitures. This home use ozone generator has 2 adjustable control where the ozone knob will allow you to control the ozone output and fan knob will allow you to control the fan speed. This wood cased ozone generator/air purifier does not merely mask mal odors like some air purifiers, it DESTROYS odors!
Specification
| Item | Household Wood Ozone Generator Air Purifier |
| Ozone output | 500mg/hr |
| Size of ozone plate | 165*115*0.635MM |
| Noise | ≤30lb |
| Dimension | 240x220x345mm |
| Generating Method | Corona Discharge |
| Application | Car, RV, Outdoor, Hotel, Garage, Commercial, Household |
| Feature | Destroy bacteria, smells and odours |
Application
Suitable for indoor air purification and sterilization, deodorization, formaldehyde removal, toluene removal, passive smoking, pollen, PM2.5, etc.;
Indoor sterilization and disinfection in public places such as bank halls, hospital clinics, inpatient departments, restaurants, clubs, and offices.
ATTENTION must be paid to the following:
1,Cooling method: Air cooling for transformer and ceramic plate.
2,When ozone generators work, it is necessary to have cooling fans to blow the ceramic plates and ozone power supplies. When installing the power supply, please make sure there is 2-3cm high space between its bottom and the fixed board, so that heat on the bottom of the power supply can be radiated quickly.
3,This is a high voltage product. Do not touch it when it is working.
4,Usually after ozone sterilization, it needs 20-30 minutes to diffuse ozone before anyone enters. And only when the ozone concentration is or below 0.15ppm, it is permitted to enter.
5,The ozone output test data is based on 95% pure oxygen feeding and dew point -45°. Different temperature and humidity in the environment will affect the ozone output and concentration.
6,This item can work continuously for 20~30 minutes with air cooling. If it continues to work without any rest, the ozone output will decrease by degrees because ceramic plates are overheated.
7, When two high voltage wires are very close to each other, especially under moist circumstances or they touch, the wires will make a light and possibly lead that the insulation becomes discoloured even melts. The way to avoid this matter is to keep the two high voltage wires parallel or separate, at least untouched.
8,Usually when ozone generator is used for test, it will be better if the interval time between two tests is one minute. It is because the output voltage and start-up electric current is very very high, if it is started up and closed down frequently within several minutes, power supply is possible to be burned due to instant or instantaneous high current.
9,Deoxidized materials or objects should not be contacted with ozone for a long time.
Clean, Sanitize and De-odour your Home, Office, uniforms and tactical gear with our premium Ozone products.